Distributor & Stockist for Engineering Tools & Industrial Supplies
 
new 0053.gif (22490 bytes)

HIGH SPEED STEEL HACKSAW BLADES

These blades have exceptionally good wear resistance and cuts through all types of materials including Alloy Steel and Stainless Steel.

LOW ALLOY STEEL HACKSAW BLADES

These blades are recommended for cutting relative softer material such as non ferous metal (alumnium ,brass, copper,bronze,mild Steel etc.)


FULL FLEXIBLE HACKSAW BLADES

These blades are fully flexible. flexible blades are primarily intended for cutting-off work, in which the blade is subjected to rough treatment. The blade can be used virtually on any type of steel.

 

BIMETAL FLEXIBLE HACKSAW BLADES

The blade consists of two different materials. High speed steel is used for the tooth line, and a lower alloy material for the back. Wear resustabce obtained as a result is even better than that of an all hard high speed steel blade, while the blade is shatterproof. Bimetal blades are suitable for all kinds of sawing, from the softest of the toughest materials.



TOOL BITS

  • Bib Tool Bits Cut Cost By:
  • Reducing Machine done time.
  • Reducing Labour Cost.
  • Reducing Wastage of expensive
    work materials.

Available In - Square, Rectangular, Round and Parting-off-Blades.

Grade - BP101(0% cobalt), BP202(5% cobalt) .
BP303(8% cobalt). BP404(10% cobalt).

home.gif (2680 bytes)
aboutus.gif (2925 bytes)
contactus.gif (3020 bytes)
products.gif (2904 bytes)
showroom.gif (3111 bytes)
feedback.gif (3013 bytes)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Back

Top

Home